The Importance of Leveling Laundry Sets

Imagine you've just had a brand-new washer and dryer set installed in your laundry room. You're excited about throwing in the first load or garment, but as soon as you start the wash cycle, you're greeted with an irritating symphony of vibrations and rattling noises. What could be causing that noise? The answer may lie in the levelness of your laundry appliances. 

samsung pair

Join us in this blog and learn about the potential causes of unleveled appliances, the importance of proper leveling, and a step-by-step guide on how to level them. Let's get your laundry room back to a harmonious state!

Potential Causes of Unlevel Laundry Machines

Before we jump into the importance of leveling laundry appliances, let's explore why your washer and dryer might be unlevel in the first place. There are several potential causes:

Uneven Flooring: Uneven or sloping floors are one of the primary culprits for unlevel laundry machines. Your appliances require a stable and level surface to operate smoothly.

Improper Installation: If your washer and dryer weren't installed correctly, their leveling legs may not be properly leveled. It's essential to ensure that the installation was done accurately.

Wear and Tear: Over time, your appliances may shift, or their legs might become uneven due to wear and tear. Regular maintenance is crucial to avoid this issue.

red level

The Importance of Leveling Laundry Appliances

Why is it so crucial to have level laundry appliances? Here are a few reasons:

Noise Reduction: Level appliances produce fewer vibrations and less noise, creating a quieter laundry experience, especially if your laundry room is near living spaces.

Efficient Operation: Properly leveled machines operate more efficiently, ensuring that they clean and dry your clothes effectively without any issues.

Extended Lifespan: When your appliances are level, there is less stress on their internal components, leading to a longer lifespan for your washer and dryer.

man holding wrench

How to Properly Level Your Washer and Dryer

To properly check and level your laundry appliance, you will need the following tools: a leveling bubble tool and adjustable pliers or a wrench.

Step 1 Checking for Level: Place the leveling bubble tool on the top of your appliance.

Ensure that the bubble inside the tool is centered between the two lines. If it's not, your appliance is unleveled.

Step 2 Preparing for Leveling: Safely unplug your washer and dryer. Move the appliances away from the wall for easy access.

Step 3 Adjusting the Legs: Identify the adjustable legs at the bottom of your machines, you'll typically find these at each corner. Use the adjustable pliers to loosen or tighten these legs, raising or lowering the appliance until it's level. Check the levelness with the leveling bubble tool throughout this process.

Step 5 Testing: Plug your appliances back in. Run a short cycle to ensure they're functioning smoothly without any vibrations or noise. 

By following these steps, you can enjoy a peaceful laundry experience without any bothersome disturbances.

Don’t forget to check our recent posts to learn more about improving your laundry experience:

top load closeup

Improve Your Laundry Space at Woodcocks

A level laundry set is the key to a tranquil laundry room. The importance of leveling your washer and dryer cannot be overstated – it reduces noise, enhances efficiency, and extends the lifespan of your appliances. By routinely checking and leveling your laundry machines, you can maintain a harmonious laundry space.

If you need to purchase replacement parts for your washer and dryer sets, make sure to visit our laundry accessories section. Looking to upgrade your laundry appliances? Explore our wide selection of washing machines and dryers at Woodcocks. If you have any questions, do not hesitate to contact us or visit our appliance store location in Doral, Florida. Our experts are eager to answer any questions and assist you in buying the best laundry appliances.

Unleveled Laundry Appliance: Commonly Asked Questions

Why is my washer making so much noise?

If your washer is making noise, it's likely due to unleveling. Unlevel laundry appliances can cause vibrations and rattling noises during operation.

Can I level my appliances on my own?

Yes, you can level your appliances yourself with the right tools and follow a step-by-step guide like the one provided in this article.

How often should I level a washing machine?

It's a good practice to check the level of your appliances every few months or whenever you move them.

What if my laundry room floor is uneven?

If your laundry room floor is uneven, you may need to address this issue before leveling your appliances. Consider using shims or leveling the floor.

What are the signs that my laundry machine is not leveled?

Common signs of unlevel laundry machines include excessive vibrations, loud noises during operation, and clothes not being evenly washed or dried.


Your Cart

: 0

Sign Up For Savings Today!